美国地震区划图的发展——地震危险性图与抗震设计图

潘华; 张萌; 李金臣

doi:10.11899/zzfy20170307

美国地震区划图的发展——地震危险性图与抗震设计图

doi: 10.11899/zzfy20170307

中国地震局地球物理研究所, 北京 100081

详细信息

作者简介:
潘华, 男, 生于1966年。研究员, 博士研究生导师。主要从事地震活动性、地震危险性分析、地震区划相关工作。E-mail:panhua.mail@163.com

计量
- 文章访问数: 433
- HTML全文浏览量: 88
- PDF下载量: 64
- 被引次数: 0
出版历程
- 收稿日期: 2017-04-18
- 刊出日期: 2017-09-01

Review of Seismic Zonation in United States, Seismic Hazard Maps and Seismic Design Maps

Institute of Geophysics, China Earthquake Administration, Beijing 100081, China

摘要

摘要: 在过去的数十年里，美国地震区划图随着建筑抗震设计需求而不断发展变化，从最初的一张图发展成现今抗震设计图和地震危险性图两图共生的形式。地震危险性图主要反映依据地震科学认识与基础观测资料评估得到的国土地震危险性分布，抗震设计图则继承了传统地震区划图的主要功能，反映国土范围内建筑抗震设计所需地震动设计参数的分布，服务于建筑设计。依据抗震设计需求，美国地震区划图的演化过程可划分为地震系数分区区划、设计地震地震动区划和最大考虑地震地震动区划3个阶段，各阶段均始于地震危险性图的改进，并以抗震设计理念与方法的更新换代以及与之相适应的抗震设计图的编制为标志。本文总结了美国地震区划图的演化历程，对地震危险性图与抗震设计图发生变革的技术原因、主要特征、应用意义及其影响进行了重点的分析与论述。
- 地震区划图 /
- 抗震设计图 /
- 地震危险性图 /
- 最大考虑地震 /
- 设计地震 /
- 地震动
Abstract: During the past few decades, seismic zonation maps in the United States keep developing and improving with change of requirements of building seismic design, from early single-map mode to nowadays two-maps mode consisting of Seismic Design Maps and Seismic Hazard Maps. The SHM is used for presenting the distribution of seismic hazard in territory which is evaluated based on science understanding about earthquakes and observational data. The SDM inherits the main function of the seismic zonation map, and is used for presenting the distribution of buildings seismic design coefficients. The history of the US Seismic Zonation Maps can be divided into three stages which using different parameters of seismic design ground motion, the coefficients of seismic zones, the design earthquake ground motion and the maximum considered earthquake ground motion. Each stage begins with improving of SHM and marked by a significant advance in seismic design procedures and SDM. In this paper, the history of US seismic zonation map is reviewed, and the technical reasons caused SDM updating, main features of SDM, significance and influence of SDM application and so on are focused to discussion.
- Seismic zonation map /
- Seismic design map /
- Seismic hazard map /
- Maximum considered earthquake /
- Design earthquake /
- Ground motion

HTML全文

参考文献(22)

李善邦, 1957.中国地震区域划分图及其说明.Ⅰ.总的说明.地球物理学报, 6(2):127-158. http://www.cnki.com.cn/Article/CJFDTOTAL-DQWX195702001.htm

胡聿贤, 1988.地震工程学.北京:地震出版社.

张萌, 潘华, 李金臣, 2017.美国建筑抗震设计的法规体系与设计地震动确定.震灾防御技术, 12(1):306-318. http://www.cnki.com.cn/Article/CJFDTOTAL-ZZFY201702007.htm

Algermissen S. T., 1969. Seismic risk studies in the United States. In:Proceedings of the 4th World Conference on Earthquake Engineering. Santiago, Chile:ERIC, 1969:14-27.

Algermissen S. T., Perkins D. M., 1976. A probabilistic estimate of maximum acceleration in rock in the contiguous United States. U.S. Geological Survey, Open-File Report:76-416.

Algermissen S. T., Perkins D. M., Thenhaus P. C., et al., 1982. Probabilistic estimates of maximum acceleration and velocity in rock in the contiguous United States. U.S. Geological Survey, Open-File Report 82-1033.

Algermissen S. T., Perkins D. M., Thenhaus P. C., et al., 1990. Probabilistic earthquake acceleration and velocity maps for the United States and Puerto Rico, U.S. Geological Survey, Miscellaneous Field Studies Map 2120.

Algermissen S. T., Leyendecker E. V., 1992. Technique for uniform hazard spectra estimation in the US. In:Proceedings of the 10th World Conference on Earthquake Engineering. Madrid, Spain:Australian Earthquake Engineering Society, 391-398.

ANSI, 1982. Minimum design loads for buildings and other structures, American National Standard ANSI A58.1. American National Standards Institute, Inc. New York.

ASCE, 2010. Minimum design loads for buildings and other structures, ASCE/SEI 7-10. 1801 Alexander Bell Drive, Reston, Virginia:American Society of Civil Engineers, 20191.

ATC, 1978. Tentative provisions for the development of seismic regulations for buildings (ATC-3-06). NBS Special Publication 510, NSF Publication 78-8. Washington, DC:Applied Technology Council, 1978.

Beavers J. E., 2002. A review of seismic hazard description in US design codes and procedures. Progress in Structural Engineering and Materials, 4(1):46-63. doi: 10.1002/(ISSN)1528-2716

FEMA, 1998. NEHRP recommended provisions for seismic regulations for new buildings and other structures. Part 1:Provisions. (FEMA 302/1997 edition). Washington, DC:Federal Emergency Management Agency, Building Seismic Safety Council.

FEMA, 2001. NEHRP recommended provisions for seismic regulation for new buildings and other structures. Part1:Provisions. (FEMA 368/2000 edition). Washington, DC:Federal Emergency Management Agency, Building Seismic Safety Council.

FEMA, 2004. NEHRP recommended provisions for seismic regulation for new buildings and other structures. Part1:Provisions. (FEMA P-450-1/2003 edition). Washington, DC:Federal Emergency Management Agency, Building Seismic Safety Council.

FEMA, 2009. NEHRP recommended seismic provisions for new buildings and other structures (FEMA P-750/2009 edition). Washington, DC:Federal Emergency Management Agency, Building Seismic Safety Council.

FEMA, 2015. NEHRP Recommended Seismic Provisions for New Buildings and Other Structures, volume Ⅰ:Part 1:Provisions, Part 2:Commentary (FEMA P-1050-1/2015 edition). Washington, DC:Federal Emergency Management Agency, Building Seismic Safety Council.

Frankel A. D., Petersen M. D., Mueller C. S., et al., 2002. Documentation for the 2002 update of the National Seismic Hazard Maps:U.S. Geological Survey Open-File Report 2002-420.

Leyendecker E. V., Hunt R. J., Frankel A. D., et al., 2000. Development of maximum considered earthquake ground motion maps. Earthquake Spectra, 16(1):21-40. doi: 10.1193/1.1586081

Roberts E. B., Ulrich F. P., 1950. Seismological activities of the U.S. Coast and Geodetic Survey in 1948. Bulletin of the Seismological Society of America, 1950, 40(3):195-216.

Petersen M. D., Frankel A. D., Harmsen S. C., et al., 2008. Documentation for the 2008 Update of the United States National Seismic Hazard Maps, USGS Open File Report 2008-1128.

Petersen M. D., Moschetti M. P., Powers P. M., et al., 2014. Documentation for the 2014 update of the United States national seismic hazard maps:U.S. Geological Survey Open-File Report 2014-1091.

施引文献

资源附件(0)

访问统计

点击查看大图

计量

文章访问数: 433
HTML全文浏览量: 88
PDF下载量: 64
被引次数: 0

美国地震区划图的发展——地震危险性图与抗震设计图

doi: 10.11899/zzfy20170307

作者简介: 潘华, 男, 生于1966年。研究员, 博士研究生导师。主要从事地震活动性、地震危险性分析、地震区划相关工作。E-mail:panhua.mail@163.com

计量

出版历程

Review of Seismic Zonation in United States, Seismic Hazard Maps and Seismic Design Maps

计量

出版历程

目录

作者简介:
潘华, 男, 生于1966年。研究员, 博士研究生导师。主要从事地震活动性、地震危险性分析、地震区划相关工作。E-mail:panhua.mail@163.com